Update / fix for GH 8.5.002?

Replies to This Discussion

Permalink Reply by Rafael del Molino on November 16, 2011 at 9:04am

Hi Brian,

 

McNeel change Grasshopper a lot in the last version 0.8.0052. It requires we change small things in a lot of commands. All is ready, you can download RhinoNest for Grasshopper 0.3 in Download menu.

 

If you have any doubt, don't hesitate to contact me.

 

Thanks and best regards,

 

Rafael del Molino

TDM Solutions SL

• ▶ Reply

Permalink Reply by ryles on November 16, 2011 at 2:31pm

Thanks Rafael!

ryan

• ▶ Reply

Permalink Reply by Alex Woodhouse on November 16, 2011 at 6:29pm

I just updated with the new grasshopper file, but am still getting an error - this time upon opening grasshopper. it comes up with the following message:

 

 

Am I going about the update wrong? I reinstalled grasshopper, the rhinonest plugin, and the rhinonest for grasshopper component, but am still getting the error. Any advice on how I can resolve this would be much appreciated!

 

Thanks,

 

Alex

• ▶ Reply

Permalink Reply by Brian Harms on November 16, 2011 at 9:10pm

yeah I get the same problem.

• ▶ Reply

Permalink Reply by ryles on November 17, 2011 at 12:38am

Don't know if it is any help but goto the Grasshopper forum at grasshopper3d.com and

look at this thread, make sure you have the latest runtimes. 

http://www.grasshopper3d.com/forum/topics/grasshopper-0-8-0052-avai...

 

And also check the post:

http://www.grasshopper3d.com/forum/topics/grasshopper-0-8-0052-avai...

There is a hotfix David posted that wasn't really noted. You might want to backup the file you are replacing first though.

 

Dunno if it will help, but I'm not having issues.  I installed the 32 bit version. Haven't tried the 64 bit.

Which one did you install?

 

hth,

ryan

• ▶ Reply

Permalink Reply by Rafael del Molino on November 18, 2011 at 9:22am

Hi,

 

Sorry about that, the problem is we are compiling in Framework .Net 4.0, and it works in Rhino 5.0 but no in 4.0.

 

Here a file to fix it. Please copy it in c:\Program Files\RhinoNest for Grasshopper 0.3\bin32 and it will works in Rhino 4.0.

 

If you have any doubt, don't hesitate to contact me.

 

Thanks and best regards,

 

Rafael del Molino

TDM Solutions SL



Attachments:

• RhinoNestGrasshopper.gha, 145 KB

• ▶ Reply

Permalink Reply by Alex Woodhouse on November 18, 2011 at 5:53pm

rafael,

 

thanks for that update. it didn't originally work, but i realized its because I also had that file in C:\Program Files (x86)\Rhinoceros 4.0\Plug-ins\Grasshopper\Components and had to swap it out of there too.

 

thanks again for the help!

 

Alex

• ▶ Reply

▶ Reply to Discussion